ºÚÁÏÊÓƵ

[IP Solution] How to Configure Multicast Streaming via "ONVIF" protocol from i-PRO Cameras

Applicable Models: Decoders with system software version 5 (DX0211-IP, FDF2711W-IP)

Ìý

1. Prerequisites (Camera Settings)
   Configure the following settings on the camera in advance:
   ・User settings
   ・Set the video compression format of the target stream to H.264
2. Camera Registration
   Register the camera using the ONVIF protocol in the decoder’s [Camera Registration] of the [System Settings].
3. Multicast Configuration
   In the [Camera Function Settings] of [System Settings], select the target camera and open the [Video Settings] tab. Configure the following settings.
   
   ・Media Profile: Profile of the target stream
   ・Transmission Mode: Multicast
   ・Multicast Address [224.0.0.0-239.255.255.255]
   ・Multicast Port [1824-65534] (even number only)
   ・Multicast TTL [1-255]

Ìý

â–  Notes
If a multicast address already in use on the same camera is specified, an error (configuration failure) will occur. Make sure to use a unique multicast address.
When streaming from multiple cameras via multicast, ensure that multicast port numbers do not overlap.