HP
HP Z2 SFF G1i Workstation, HP Z2 Tower G1i Workstation and FlexScan, RadiForce Compatibility
This information is provided based on our in-house testings and we do not guarantee the compatibility in respective user it may vary from one of the manufacturers of the graphics boards.
[ Items of validation ]
- Displays BIOS image correctly
- Installs graphics driver correctly
- The graphics boards are recognized correctly after installing of the driver
- Displays the image correctly with the recommended resolution
- Plug & Play works correctly
- Displays the TG-18QC pattern of the RadiCS correctly
- The calibration function of the RadiCS works correctly
- "Standby", "Sleep" and "Shut down" functions work correctly
HP Z2 SFF G1i Workstation
*1 Specs of the workstation
CPU Intel Core Ultra 5 225 3.3GHz, BIOS Ver. X50 Ver. 01.07.01
*2 When starting the system for the first time after installing the board, a BIOS error screen will appear.
Please change the BIOS settings using the procedure below:
1. On the screen where the error is displayed, cliek "Enter Setup".
2. Select the "Security" tab and then click "Secure Boot"
3. Click the box for "Enable MS UEFI CA Key".
If the check box is disabled, temporarily uncheck "BIOS Sure Start" → "Sure Start Secure Boot Keys Protection".
4. Save the settings and restart the system.
*3 10-bit display cannot be used because proper display output is not possible.
*4 10-bit display is not available
HP Z2 Tower G1i Workstation
*1 Specs of the workstation
CPU Intel Core Ultra 9 285 2.5GHz, BIOS Ver. X51 Ver. 01.07.02
*2 When starting the system for the first time after installing the board, a BIOS error screen will appear.
Please change the BIOS settings using the procedure below:
1. On the screen where the error is displayed, cliek "Enter Setup".
2. Select the "Security" tab and then click "Secure Boot"
3. Click the box for "Enable MS UEFI CA Key".
If the check box is disabled, temporarily uncheck "BIOS Sure Start" → "Sure Start Secure Boot Keys Protection".
4. Save the settings and restart the system.
*3 10-bit display cannot be used because proper display output is not possible.
*4 10-bit display is not available
